University of Toronto researchers develop portable 3D skin printer to repair deep wounds

University of Toronto researchers have developed a handheld 3D skin printer that deposits even layers of skin tissue to cover and heal deep wounds.
9 months ago

University of Toronto researchers have developed a handheld 3D skin printer that deposits even layers of skin tissue to cover and heal deep wounds. The team believes it to be the first device that forms tissue in situ, depositing and setting in place, within two minutes or less.

The research, led by PhD student Navid Hakimi under the supervision of Associate Professor Axel Guenther of the Faculty of Applied Science & Engineering, and in collaboration with Dr. Marc Jeschke, director of the Ross Tilley Burn Centre at Sunnybrook Hospital and professor of immunology at the Faculty of Medicine, was recently published in the journal Lab on a Chip.

For patients with deep skin wounds, all three skin layers – the epidermis, dermis and hypodermis – may be heavily damaged. The current preferred treatment is called split-thickness skin grafting, where healthy donor skin is grafted onto the surface epidermis and part of the underlying dermis.

Split-thickness grafting on large wounds requires enough healthy donor skin to traverse all three layers, and sufficient graft skin is rarely available. This leaves a portion of the wounded area “ungrafted” or uncovered, leading to poor healing outcomes.

Although a large number of tissue-engineered skin substitutes exist, they are not yet widely used in clinical settings.

“Most current 3D bioprinters are bulky, work at low speeds, are expensive and are incompatible with clinical application,” explains Guenther.

Photo: From left to right, Associate Professor Axel Guenther, Navid Hakimi and Richard Cheng have created the first ‘skin printer’ that forms tissues in situ for application to wounds (photo by Liz Do)

The research team believes their in-situ skin printer is a platform technology that can overcome these barriers, while improving the skin-healing process – a major step forward.

The handheld skin printer resembles a white-out tape dispenser – except the tape roll is replaced by a microdevice that forms tissue sheets. Vertical stripes of “bio ink,” made up of protein-based biomaterials including collagen, the most abundant protein in the dermis, and fibrin, a protein involved in wound healing, run along the inside of each tissue sheet.

“Our skin printer promises to tailor tissues to specific patients and wound characteristics,” says Hakimi. “And it’s very portable.”

The handheld device is the size of a small shoe box and weighs less than a kilogram. It also requires minimal operator training and eliminates the washing and incubation stages required by many conventional bioprinters.

The researchers plan to add several capabilities to the printer, including expanding the size of the coverable wound areas. Working with Jeschke’s team at Sunnybrook Hospital, they plan to perform more in vivo studies. They hope that one day they can begin running clinical trials on humans, and eventually revolutionize burn care.

Source: University of Toronto

Read more

Comments

No comments to display.

Related posts

Toyota Mobility Foundation announces finalists in $4 million global Mobility Unlimited Challenge

The Challenge invited engineers, innovators, and designers from across the world to submit designs for game-changing technologies, incorporating intelligent systems, to improve the mobility and independence of people with lower-limb paralysis. Central to the Challenge is the importance of collaboration with end-users to develop devices which will integrate seamlessly into users’ lives and environments, while being comfortable and easy to use, enabling greater independence and increased participation in daily life.

PRIMA Call for Proposals: Bridging the gap between potential and actual irrigation performance in the Mediterranean

In the Mediterranean basin, water balances and water used for irrigation including irrigation performance is often lower than potential at the farm and at the water users association level. This gap is evident for average performance, but it is particularly important when the dispersion among farmers and their associations is considered. Attaining Sustainable Mediterranean irrigation requires to assess the real water balances in the area of irrigation, amount of water available for irrigation ensuring that water levels are environmentally safe for ecosystems and other needs. Furthermore, optimising irrigation performance requires to combine technological, managerial and governance innovations taking into account the availability, safety and quality of water resources, existing institutional arrangements, as well as crop agronomy planning.
Application Deadline in a month

PRIMA Call for Proposals: Agro-food Value Chain 2019

Proposals should focus on products with high added value, most exposed to fraud and valorise productions that have been discontinued but hold nutritional value and are important for biodiversity conservation. Proposal should also aim at creating trans-national networks of laboratories, validating and harmonizing protocols, sharing open-data on food products of the Mediterranean tradition, providing a robust support for certification and control bodies, and building capacity in key enabling technologies related to authenticity and traceability.
Application Deadline in a month

African Development Bank Group approves $25 million Equity Investment in Fund for Renewable Energy Projects in Africa

ARPF projects will focus on mature technologies including wind, solar PV, small to medium hydro, geothermal and biomass. These would include grid-connected independent power producers (“IPPs”), and decentralized energy projects (commercial & industrial solar, mini-grids and solar home systems companies). The Fund’s strategy is to prioritize projects with a clear timeline to financial close, with emphasis on de-risking early stage greenfield projects.

European call for proposals: Innovative utilisation of aquatic biomass and Novel aquaculture production systems

The proposals should seek to be complementary with or adding to other projects funded under FP7 and Horizon 2020, ERA-NETs, BBI JU or other funding schemes, both ongoing and recently finished. They should reflect awareness of the objectives of running projects in relevant fields to avoid overlap. Proposed projects must demonstrate industry involvement.
Application Deadline in 2 months

European call for proposals: Sustainable and Resilient agriculture for food and non-food systems

Based on the two previous calls, the FACCE SURPLUS partners decided to further advance their successful funding scheme with a third call of the initiative in order to complete the portfolio of projects and filling remaining research and funding gaps. Having in mind the research already conducted in FACCE SURPLUS projects, this call at the end of the initiative aims at further improving collaboration in the area of food and nonfood biomass production and transformation systems.
Application Deadline in 2 months

A Quick Look At The Latest Happenings In The Cloud Integration Market

As an emerging trend of technology the field of cloud Integration is steadily expanding. The global cloud Integration Market is growing approximately at a CAGR of 8% during 2018-2023 and it is expected to grow at a highest CAGR during the forecast period.

A Close Look At The Latest Research Trends Within The 3D Printing Metals Market

3D printing involves the creation of a 3 dimensional object by adding successive layers of a particular material one on top of each other until the overall object has been formed. Metals constitute one of the main materials used for 3D printing.

Call for Applications: Go Green in the City 2019

The Go Green in the City challenge is now entering its 9th year running and our 2019 edition is going to be even bigger, better and bolder! We are looking for students like you from around the world who are willing to put their skills and ideas to the test.
Application Deadline in 4 months