Novel NUS technique strengthens building structures by mixing biochar from saw dust with cement

Researchers from the National University of Singapore (NUS) have found an innovative and environmental-friendly technique to enhance building structures. The new method, which incorporates biochar recycled from saw dust into cement, improves the strength and water tightness of mortar and concrete, and offers an alternative use to the large volume of wood waste produced in Singapore.
8 months ago

By mixing biochar from saw dust with cement, concrete constructions can be made 20 per cent stronger and 50 per cent more watertight       

Researchers from the National University of Singapore (NUS) have found an innovative and environmental-friendly technique to enhance building structures. The new method, which incorporates biochar recycled from saw dust into cement, improves the strength and water tightness of mortar and concrete, and offers an alternative use to the large volume of wood waste produced in Singapore.

Wood waste from furniture factories makes up a huge portion of waste generated in Singapore. In 2016 alone, more than 530,000 tonnes of wood waste were produced, of which, a significant amount is in the form of saw dust. Instead of incinerating or disposing them in landfills, wood waste can be recycled to make biochar, a porous, carbon-rich material that absorbs and retains water well. 

Due to its good water absorption and retention properties, biochar is largely employed in the agricultural industry as soil amendment to improve crop yield. Associate Professor Kua Harn Wei, his PhD student, Mr Souradeep Gupta, and their team from the Department of Building at NUS School of Design and Environment further expanded the application of biochar by successfully using biochar recycled from saw dust to significantly improve the mechanical and permeability properties of concrete and mortar.

Photo: The research team led by Associate Professor Kua Harn Wei (first person from the right) has developed the novel approach of using biochar made from recycled wood waste to enhance concrete structures.

The improvement in the performance of concrete and mortar is achieved by adding a small amount of dry biochar powder into the concrete or mortar mixture. The added biochar alters the conditions in the mixture and enhances the curing and hardening of the mixture.

In the experiments, the researchers found that improvement in early strength and impermeability of the concrete and mortar mixture can reach up to 20% and 50% respectively. This can facilitate early removal of formwork, which substantially saves construction time and cost. Furthermore, biochar itself ‘locks in’ carbon in its structure, which would otherwise be released to the atmosphere by decay or by incineration of biomass. The use of the biochar technology in concrete construction is therefore a novel and innovative way to store carbon in buildings while promoting recycling of wood waste and strengthening building structures.

Assoc Prof Kua, said, “This is a simple and affordable strategy to enhance our building structures, particularly in Singapore, where water leakage from rain and water pipes are common problems. At the same time, we are putting the large amount of wood waste generated in Singapore into good use. Close to 50 kilograms of wood waste can be utilised for every tonne of concrete fabricated. We typically require 0.5 cubic metre of concrete for every square metre of floor area built in Singapore. This translates to around six tonnes of wood waste being recycled to build a typical 4-room HDB unit with a floor area of 100 square metres.” 

The NUS team is currently in discussion with a local firm to explore the commercialisation of this technology, and is also leveraging this technology to develop other high performance cement composites with a wide range of applications.

Source: National University of Singapore (NUS)

Comments

No comments to display.

Related posts

Continental free trade area to boost e-commerce in Africa

High-level session at UNCTAD's Africa eCommerce Week shows that the continent has the potential to scale e-commerce enterprises - but its new free trade area will be key.

Bayer helps farmers keep sows healthy with new BCS SowDition smartphone application

BCS SowDition enables accurate and standardized body condition scoring of sows in four simple steps, contributing to better health and management.

Call for applications: 2019 Syngenta Crop Challenge in Analytics prize

Corn is one of the world’s most important crops. Each year, breeders create several new corn products, known as experimental hybrids. Corn breeders work to create corn hybrids that can maintain high yield across a wide range of environments.
Application Deadline in a month

Application of the IoT technologies in the poultry chain

The growth of poultry relies on the environment in which the bird feels comfortable, as well as on good-quality feed and water. In this use case, the performance of the poultry production chain is optimised through IoT driven technologies.

New Initiative to Mitigate Risk for Global Solar Scale-up

The World Bank and Agence Française de Développement (AFD) are developing a joint Global Solar Risk Mitigation Initiative (SRMI), an integrated approach to tackle policy, technical and financial issues associated with scaling up solar energy deployment, especially in some of the world’s poorest countries.

Challenges and opportunities of introducing Internet of Things and Artificial Intelligence applications into Supply Chain Management

The study examines the challenges and opportunities of introducing Artificial Intelligence (AI) and the Internet of Things (IoT) into the Supply Chain Management (SCM). This research focuses on the Logistic Management. The central research question is “What are the key challenges and opportunities of introducing AI and IoT applications into the Supply Chain Management?”

Internet of Robotic Things – Converging Sensing/Actuating, Hyperconnectivity, Artificial Intelligence and IoT Platforms

The Internet of Things (IoT) concept is evolving rapidly and influencing new developments in various application domains, such as the Internet of Mobile Things (IoMT), Autonomous Internet of Things (A-IoT), Autonomous System of Things (ASoT), Internet of Autonomous Things (IoAT), Internet of Things Clouds (IoT-C) and the Internet of Robotic Things (IoRT) etc. that are progressing/advancing by using IoT technology.

3D Food Printers Market Driven by Growing Demand for Customized Food

The 3D food printers market is expected to grow at a robust CAGR from 2017 to 2028. This market growth is expected to be driven by factors such as the growing demand for customised food and the development of the industrial sector in this region.

Vision-Based Apple Classification for Smart Manufacturing

In this paper, an accurate data capture approach based on a vision sensor is proposed. Three image recognition methods are studied to determine the best vision-based classification technique, namely Bag of Words (BOW), Spatial Pyramid Matching (SPM) and Convolutional Neural Network (CNN).

Intel Drone Solutions Modernize and Increase Efficiency for US Bridge Inspections

Intel collaborated with two departments of transportation to improve bridge inspections, supplementing manual inspections of the Daniel Carter Beard Bridge connecting Ohio and Kentucky and the Stone Arch Bridge in Minnesota. Throughout the inspections, Intel’s advanced automated commercial drone hardware and software solutions increased efficiency and produced more reliable data in a fraction of the time and cost of traditional methods.