Renewable Energy the Most Competitive Source of New Power Generation in GCC

Under current plans, the region will install 7 gigawatts (GW) of new power generation capacity from renewable sources by the early 2020s

Abu Dhabi, UAE, 15 January 2019

Renewable energy is the most competitive form of power generation in Gulf Cooperation Council (GCC) countries, according to a new report published today by the International Renewable Energy Agency (IRENA). Abundant resources, together with strong enabling frameworks have led to solar PV prices of below 3 cents per kilowatt hour and dispatchable concentrated solar power (CSP) of 7.3 cents per kilowatt hour, which is less than some utilities in the region pay for natural gas.

IRENA’s new ‘Renewable Energy Market Analysis: GCC 2019’ launched during Abu Dhabi Sustainabilty Week, says achieving stated 2030 targets can bring significant economic benefits to the region including the creation of more than 220 000 new jobs whilst saving over 354 million barrels of oil equivalent (MBOE) in regional power sectors. The targets could reduce the power sector’s carbon dioxide emissions by 136 million tonnes (22 per cent reduction), while cutting water withdrawals in the power sector by 11.5 trillion litres (17 per cent reduction) in 2020.

The findings come as GCC economies seek to diversify their economies against the backdrop of fast-growing domestic energy demand and a desire to safeguard hydrocarbon export revenues for the future.

“The GCC is among the most attractive regions in the world to develop large-scale solar and wind energy projects as a result of resource abundance and a favourable policy environment, a fact that is backed up by record low prices,” said IRENA Director-General, Adnan Z. Amin. “As a fossil-fuel exporting region, the GCC’s decisive move towards a renewable energy future is a signal to global investors and to the energy community that we are experiencing a step-change in global energy dynamics and a true energy transformation.”

“The UAE’s commitment to diversifying the energy mix is central to our long-term economic growth and sustainable development objectives,” said H.E. Suhail Al Mazrouei, UAE Minister of Energy. “IRENA’s GCC analysis provides further evidence of the strong socio-economic case for renewable energy deployment, from job creation to emission reductions. As we look to add generation capacity to serve growing populations and expanding economies, renewables will increasingly serve as central pillar of low-carbon development.”

At the end of 2017, the region had some 146 GW of installed power capacity, of which renewable energy accounted for 867 megawatts. Around 68 per cent this capacity was in the UAE. This represents a four-fold increase on capacity in 2014. Following the UAE are Saudi Arabia with 16 per cent and Kuwait with nine per cent of regional capacity.

With renewable energy targets now in place across the region, the GCC is poised for a significant acceleration in renewables deployment as countries pursue national goals. Under current plans, the region will install a total of almost 7 gigawatts (GW) new power generation capacity from renewable sources by the early 2020s.

Solar PV dominates the region’s renewables outlook, accounting for three-quarters of the regional project pipeline, CSP and wind accout for 10 per cent and nine per cent respectively. Solar-assisted enhanced oil recovery in Oman is also expected to contribute about 1 gigawatt-thermal (GWth) in 2019.

Proactive policies are central to accelerating renewable energy deployment, per the report, suggesting that lessons can be drawn from the GCC countries where substantial inroads have been made thanks to firm government commitments and credible, time-bound targets with a clear focus on a supportive business environment for investments.

Source: IRENA

Illustration Photo: Mohammed bin Rashid Al Maktoum Solar Park (credit: Mohammed bin Rashid Al Maktoum Solar Park / IRENA)

Comments

No comments to display.

Related posts

Call for Applications: Go Ignite Global Call

Start-ups working on solutions in IoT, Big Data Analytics, Cyber Security, Artificial Intelligence, 5G and Customer Experience Enhancement are encouraged to apply.
Application Deadline in 11 days

EU's Call for Proposals: Digital technologies for improved performance in cognitive production plants

Proposals need to develop new technologies to realise cognitive production plants, with improved efficiency and sustainability, by use of smart and networked sensor technologies, intelligent handling and online evaluation of various forms of data streams as well as new methods for self-organizing processes and process chains.
Application Deadline in 4 days

Increased Consumption of Plant-Based Protein Diets to Mitigate the Incidence of Type 2 Diabetes

The < a href = "https://www.marketsandmarkets.com/Market-Reports/wheat-protein-market-67845768.html">wheat protein market</a> is estimated at USD 2.04 Billion in 2017 and is projected to reach USD 2.58 Billion by 2022, at a CAGR of 4.8% from 2017. The wheat protein market has been largely driven by the growing demand for bakery products, the increasing popularity of plant-based foods, wheat protein being a suitable alternative for non-animal protein among vegans coupled with nutritional benefits for lactose-intolerant consumers.

Increase in Use of Crop Protection Products in Developing Countries Drives the Pesticide Inert Ingredients Market

The pesticide inert ingredients market is projected to reach USD 4.7 billion by 2023, from USD 3.5 billion in 2018, at a CAGR of 6.14% during the forecast period. The market is driven by factors such as the increasing demand for specific inert ingredients in pesticide formulation and capability of inert ingredients to improve the efficacy of pesticide application.

Pilot plant to turn sugarcane waste into biofuel and beer bottles

Their patented REACH technology, developed by US parent company Mercurius Biorefining, has the potential to convert sugarcane bagasse and other biomass into cost effective drop-in biofuels and bio-chemicals , as alternatives to fossil fuels.

Call for applications: The Entrepreneurship World Cup

The Entrepreneurship World Cup is more than just a global pitch competition with a shot at life-changing prizes. With 100,000 entrants from around the world, EWC elevates entrepreneurs – providing you with tools and resources to grow your venture. It doesn’t matter how far you’ve come – idea-stage, early-stage, growth-stage or beyond – EWC can put you on the right course. Leverage world-class content in the EWC Accelerator to: unleash your ideas, hone your pitching skills and engage with a global network of mentors. And, oh yeah, compete for those life-changing prizes, together with business opportunities and investment.
Application Deadline in 3 months

EU's Call for Proposals: EGNSS applications fostering digitisation

Actions should deliver new innovative applications, with commercial impact and a clear market uptake perspective (a Business Plan is required as part of the proposal). The proposed EGNSS applications may integrate digital technologies like Internet of Things (IoT), cloud computing, big data and robotics.
Application Deadline in 16 days

Growing Farm Labor Issues due to Higher Costs and Availability Drives the Smart Harvest Market Ma

The smart harvest market is projected to reach USD 15.6 billion by 2023, from USD 9.0 billion in 2018, at a CAGR of 11.81% during the forecast period. The market is driven by factors such as growing farm labor issues due to higher costs and availability, and cost efficiency benefits offered by smart harvest systems.

Call for applications: 2019 SEED Awards for Entrepreneurship in Sustainable Development

Are you part of a small and growing eco-inclusive enterprise that continues to deliver environmental, social and economic benefits to your target markets?
Application Deadline in 2 months

Review of Emerging Additive Manufacturing Technologies in 3D Printing of Cementitious Materials in the Construction Industry

Additive manufacturing is a fabrication technology that is rapidly revolutionizing the manufacturing and construction sectors. In this paper, a review of various prototyping technologies for printing cementitious materials and selected 3D printing techniques are presented in detail.