New drip irrigation technologies allowed farmers to improve crop yields while conserving resources

For off-grid drip irrigation systems that operate via solar power, the use of the new emitters could reduce costs to the farmer by 40 percent. “For farmers in developing countries, this cost savings reduces the barrier to a water conserving and yield increasing technology,” adds Amrose.

Mary Beth O'Leary | Department of Mechanical Engineering - December 20, 2018

When it comes to the health of the planet, agriculture and food production play an enormous role. According to the Food and Agriculture Organization of the United Nations, roughly 37 percent of land worldwide is used for agriculture and food production, and 11 percent of the Earth’s land surface is used specifically for crop production. Finding ways to make agriculture more sustainable and efficient is crucial not only for the environment, but also for global food supply.

Julia Sokol grew up far away from any farm. Born in Russia, Sokol and her family moved when she was 10 years old to New York City, where her father worked for the United Nations. These days, however, Sokol, a PhD student in mechanical engineering, spends a lot of her time thinking about agriculture. For the past two years, Sokol has been working on a drip irrigation project at MIT’s Global Engineering and Research (GEAR) Lab.    

After receiving her bachelor’s in mechanical engineering at Harvard University, Sokol spent some time in industry, first as a research assistant at Schlumberger, then working at a small sustainability consulting firm. Wanting a stronger technical foundation, she applied to MIT for graduate school.

During her master’s program, Sokol took course 2.76 (Global Engineering), which was taught by associate professor and principal investigator of the GEAR Lab, Amos Winter. Having developed an interest in water-related issues, Sokol jumped at the opportunity to work with Winter on the GEAR Lab’s energy efficient drip irrigation project.

“I was really excited to join the project,” says Sokol. “It perfectly combines my passion for sustainability with my interest in fundamental research in fluid mechanics and system design.”

Rather than flood irrigation, in which water is pumped from a source to flood a field,  drip irrigation has a central pump that moves water through a network of pipes. Emitters attached to the pipes release water uniformly throughout the field, resulting in higher crop yield and less water consumption when compared to flood irrigation.

“The goal of drip irrigation is to provide water at a low enough flow rate for the roots to actually start absorbing it immediately, instead of it evaporating or percolating back down to an aquifer,” explains Sokol.

The emitters used in drip irrigation disperse water evenly, as opposed to flood irrigation, which often causes crops to get water-logged. “These drip emitters need to provide a uniform flow rate throughout the field so all crops get the same amount of water,” adds Susan Amrose, a research scientist at the GEAR Lab.

The research team first focused on the geometrical features of these emitters. They developed a mathematical model describing how the geometrical features interact with the membranes inside them. Based on this model, they optimized the emitters to get the lowest possible pressure required to ensure the water flows to crops at the right rate.

Commercial emitters require minimum activation pressure of 1 bar to provide a constant flow rate for the crops. Thanks to the changes the team made inside the emitter, they lowered the activation pressure to just 0.15 bar. This reduction in the pressure needed to activate the drippers cut the power needed to operate the central pump in half. 

“Reducing the pressure lowers the cost of the system overall, which is beneficial to the farmer, and of course it also helps reduce greenhouse gas emissions,” says Sokol.

Photo: At a treated wastewater irrigation site in Jordan, Julia Sokol installs a data logger and sensors to record pressure and flow data in irrigation pipes. Credit: Susan Amrose

For off-grid drip irrigation systems that operate via solar power, the use of the new emitters could reduce costs to the farmer by 40 percent. “For farmers in developing countries, this cost savings reduces the barrier to a water conserving and yield increasing technology,” adds Amrose.

The team has conducted a number of field trials in Morocco and Jordan, where they work with NGO partners and private farmers to test the newly designed emitters and optimized irrigation system.

“The biggest takeaway from these field trials was how much our system reduced energy and cost while providing high uniformity of flow rate to crops,” explains Sokol.

According to Amrose, Sokol has been instrumental in the development and testing of these emitters. “She brings the whole package — she is an excellent designer, she can be in the field fixing hardware, and she is also incredibly good theoretically, working with models,” Amrose says.

Sokol and the GEAR Lab team will continue to make improvements to the design of the emitters that both reduce costs, conserve resources, and improve crop yield. Their research is funded by Jain Irrigation Systems and USAID.

“The global population keeps growing, so we need greater agricultural productivity,” Sokol adds. “That’s our focus — to make that happen, especially in developing areas.”

Source: MIT News

Read more


No comments to display.

Related posts

Toyota Mobility Foundation announces finalists in $4 million global Mobility Unlimited Challenge

The Challenge invited engineers, innovators, and designers from across the world to submit designs for game-changing technologies, incorporating intelligent systems, to improve the mobility and independence of people with lower-limb paralysis. Central to the Challenge is the importance of collaboration with end-users to develop devices which will integrate seamlessly into users’ lives and environments, while being comfortable and easy to use, enabling greater independence and increased participation in daily life.

PRIMA Call for Proposals: Bridging the gap between potential and actual irrigation performance in the Mediterranean

In the Mediterranean basin, water balances and water used for irrigation including irrigation performance is often lower than potential at the farm and at the water users association level. This gap is evident for average performance, but it is particularly important when the dispersion among farmers and their associations is considered. Attaining Sustainable Mediterranean irrigation requires to assess the real water balances in the area of irrigation, amount of water available for irrigation ensuring that water levels are environmentally safe for ecosystems and other needs. Furthermore, optimising irrigation performance requires to combine technological, managerial and governance innovations taking into account the availability, safety and quality of water resources, existing institutional arrangements, as well as crop agronomy planning.
Application Deadline in a month

PRIMA Call for Proposals: Agro-food Value Chain 2019

Proposals should focus on products with high added value, most exposed to fraud and valorise productions that have been discontinued but hold nutritional value and are important for biodiversity conservation. Proposal should also aim at creating trans-national networks of laboratories, validating and harmonizing protocols, sharing open-data on food products of the Mediterranean tradition, providing a robust support for certification and control bodies, and building capacity in key enabling technologies related to authenticity and traceability.
Application Deadline in a month

African Development Bank Group approves $25 million Equity Investment in Fund for Renewable Energy Projects in Africa

ARPF projects will focus on mature technologies including wind, solar PV, small to medium hydro, geothermal and biomass. These would include grid-connected independent power producers (“IPPs”), and decentralized energy projects (commercial & industrial solar, mini-grids and solar home systems companies). The Fund’s strategy is to prioritize projects with a clear timeline to financial close, with emphasis on de-risking early stage greenfield projects.

European call for proposals: Innovative utilisation of aquatic biomass and Novel aquaculture production systems

The proposals should seek to be complementary with or adding to other projects funded under FP7 and Horizon 2020, ERA-NETs, BBI JU or other funding schemes, both ongoing and recently finished. They should reflect awareness of the objectives of running projects in relevant fields to avoid overlap. Proposed projects must demonstrate industry involvement.
Application Deadline in 2 months

European call for proposals: Sustainable and Resilient agriculture for food and non-food systems

Based on the two previous calls, the FACCE SURPLUS partners decided to further advance their successful funding scheme with a third call of the initiative in order to complete the portfolio of projects and filling remaining research and funding gaps. Having in mind the research already conducted in FACCE SURPLUS projects, this call at the end of the initiative aims at further improving collaboration in the area of food and nonfood biomass production and transformation systems.
Application Deadline in 2 months

A Quick Look At The Latest Happenings In The Cloud Integration Market

As an emerging trend of technology the field of cloud Integration is steadily expanding. The global cloud Integration Market is growing approximately at a CAGR of 8% during 2018-2023 and it is expected to grow at a highest CAGR during the forecast period.

A Close Look At The Latest Research Trends Within The 3D Printing Metals Market

3D printing involves the creation of a 3 dimensional object by adding successive layers of a particular material one on top of each other until the overall object has been formed. Metals constitute one of the main materials used for 3D printing.

Call for Applications: Go Green in the City 2019

The Go Green in the City challenge is now entering its 9th year running and our 2019 edition is going to be even bigger, better and bolder! We are looking for students like you from around the world who are willing to put their skills and ideas to the test.
Application Deadline in 4 months