NREL Details Great Potential for Floating PV Systems in USA

National Renewable Energy Laboratory (NREL) researchers estimate that installing floating solar photovoltaics on the more than 24,000 man-made U.S. reservoirs could generate about 10 percent of the nation’s annual electricity production. Their findings, published in the journal Environmental Science & Technology, reveal for the first time the potential for floating PV to produce electricity in the United States.

December 27, 2018

National Renewable Energy Laboratory (NREL) researchers estimate that installing floating solar photovoltaics on the more than 24,000 man-made U.S. reservoirs could generate about 10 percent of the nation’s annual electricity production. Their findings, published in the journal Environmental Science & Technology, reveal for the first time the potential for floating PV to produce electricity in the United States.

While the United States was the first to demonstrate floating PV panels, with the first installation occurring 10 years ago on pontoons on an irrigation pond in Napa Valley, California, the idea has not received widespread national acceptance. The U.S. focus has primarily been on installing large-scale, ground-mounted solar panels, and only had seven floating PV sites as of December 2017. Floating PV sites are being deployed more overseas, however, with more than 100 sites as of the end of last year. Japan, for example, is home to 56 of the 70 largest floating PV installations.

“In the United States, it’s been a niche application; where in other places, it’s really been a necessity,” said Jordan Macknick, the lead energy-water-land analyst for NREL and principal investigator of the project that produced the paper “Floating PV: Assessing the Technical Potential of Photovoltaic Systems on Man-Made Water Bodies in the Continental U.S.” “We’re expecting it to take off in the United States, especially in areas that are land-constrained and where there’s a major conflict between solar encroaching on farmland.”

Macknick and his NREL co-authors, Robert Spencer, Alexandra Aznar, Adam Warren, and Matthew Reese, estimate about 2.1 million hectares of land could be saved if solar panels were installed on bodies of water instead of on the ground. The use of floating PV comes with additional benefits, including reduced water evaporation and algae growth. Spencer, lead author of the paper, added that in some cases benefits could be greater than those documented in the paper, but that the team used “strict assumptions that would give us a very conservative estimate of the total potential generation and benefits.” The NREL team also found that operating floating PV alongside hydroelectric facilities yields increased energy output and cost savings because of existing transmission infrastructure.

Illustration Photo: Johnson Controls and GRID work with volunteers assembling and installing a floating PV array on a Walden water retention pond at the City's water facility in Walden, Colorado, USA. The parts are assembled and fastened on land then pushed into the water row by row. (credits: DENNIS SCHROEDER / NREL / Flickr Creative Commons Attribution-NonCommercial-NoDerivs 2.0 Generic (CC BY-NC-ND 2.0))

“Floating solar is a new industry enabled by the rapid drop in the price of solar PV modules,” said Warren, director of NREL’s Integrated Applications Center. “The cost of acquiring and developing land is becoming a larger part of the cost of a solar project. In some places, like islands, the price of land is quite high, and we are seeing a rapid adoption of floating solar.”

Source: NREL

Read more

Comments

No comments to display.

Related posts

Toyota Mobility Foundation announces finalists in $4 million global Mobility Unlimited Challenge

The Challenge invited engineers, innovators, and designers from across the world to submit designs for game-changing technologies, incorporating intelligent systems, to improve the mobility and independence of people with lower-limb paralysis. Central to the Challenge is the importance of collaboration with end-users to develop devices which will integrate seamlessly into users’ lives and environments, while being comfortable and easy to use, enabling greater independence and increased participation in daily life.

PRIMA Call for Proposals: Bridging the gap between potential and actual irrigation performance in the Mediterranean

In the Mediterranean basin, water balances and water used for irrigation including irrigation performance is often lower than potential at the farm and at the water users association level. This gap is evident for average performance, but it is particularly important when the dispersion among farmers and their associations is considered. Attaining Sustainable Mediterranean irrigation requires to assess the real water balances in the area of irrigation, amount of water available for irrigation ensuring that water levels are environmentally safe for ecosystems and other needs. Furthermore, optimising irrigation performance requires to combine technological, managerial and governance innovations taking into account the availability, safety and quality of water resources, existing institutional arrangements, as well as crop agronomy planning.
Application Deadline in a month

PRIMA Call for Proposals: Agro-food Value Chain 2019

Proposals should focus on products with high added value, most exposed to fraud and valorise productions that have been discontinued but hold nutritional value and are important for biodiversity conservation. Proposal should also aim at creating trans-national networks of laboratories, validating and harmonizing protocols, sharing open-data on food products of the Mediterranean tradition, providing a robust support for certification and control bodies, and building capacity in key enabling technologies related to authenticity and traceability.
Application Deadline in a month

African Development Bank Group approves $25 million Equity Investment in Fund for Renewable Energy Projects in Africa

ARPF projects will focus on mature technologies including wind, solar PV, small to medium hydro, geothermal and biomass. These would include grid-connected independent power producers (“IPPs”), and decentralized energy projects (commercial & industrial solar, mini-grids and solar home systems companies). The Fund’s strategy is to prioritize projects with a clear timeline to financial close, with emphasis on de-risking early stage greenfield projects.

European call for proposals: Innovative utilisation of aquatic biomass and Novel aquaculture production systems

The proposals should seek to be complementary with or adding to other projects funded under FP7 and Horizon 2020, ERA-NETs, BBI JU or other funding schemes, both ongoing and recently finished. They should reflect awareness of the objectives of running projects in relevant fields to avoid overlap. Proposed projects must demonstrate industry involvement.
Application Deadline in 2 months

European call for proposals: Sustainable and Resilient agriculture for food and non-food systems

Based on the two previous calls, the FACCE SURPLUS partners decided to further advance their successful funding scheme with a third call of the initiative in order to complete the portfolio of projects and filling remaining research and funding gaps. Having in mind the research already conducted in FACCE SURPLUS projects, this call at the end of the initiative aims at further improving collaboration in the area of food and nonfood biomass production and transformation systems.
Application Deadline in 2 months

A Quick Look At The Latest Happenings In The Cloud Integration Market

As an emerging trend of technology the field of cloud Integration is steadily expanding. The global cloud Integration Market is growing approximately at a CAGR of 8% during 2018-2023 and it is expected to grow at a highest CAGR during the forecast period.

A Close Look At The Latest Research Trends Within The 3D Printing Metals Market

3D printing involves the creation of a 3 dimensional object by adding successive layers of a particular material one on top of each other until the overall object has been formed. Metals constitute one of the main materials used for 3D printing.

Call for Applications: Go Green in the City 2019

The Go Green in the City challenge is now entering its 9th year running and our 2019 edition is going to be even bigger, better and bolder! We are looking for students like you from around the world who are willing to put their skills and ideas to the test.
Application Deadline in 4 months