Stanford researchers develop a rooftop device that can make solar power and cool buildings

A new rooftop device under development will be able to produce electricity from sunlight while also beaming heat directly into space to cool buildings.

NOVEMBER 8, 2018 - Standford News - BY TOM ABATE

Stanford electrical engineer Shanhui Fan wants to revolutionize energy-producing rooftop arrays.

Today, such arrays do one thing, they turn sunlight into electricity. But Fan’s lab has built a device that could have a dual purpose, generating electricity and cooling buildings.

“We’ve built the first device that one day could make energy and save energy, in the same place and at the same time, by controlling two very different properties of light,” said Fan, senior author of an article appearing Nov. 8 in Joule.

The sun-facing layer of the device is nothing new. It’s made of the same semiconductor materials that have long adorned rooftops to convert visible light into electricity. The novelty lies in the device’s bottom layer, which is based on materials that can beam heat away from the roof and into space through a process known as radiative cooling.

In radiative cooling, objects, including our own bodies, shed heat by radiating infrared light. That’s the invisible light night-vision goggles detect. Normally this form of cooling doesn’t work well for something like a building because Earth’s atmosphere acts like a thick blanket and traps the majority of the heat near the building rather allowing it to escape, ultimately into the vast coldness of space.

Photo: Professor Shanhui Fan and postdoctoral scholar Wei Li atop the Packard Electrical Engineering building with the apparatus that is proving the efficacy of a double-layered solar panel. The top layer uses the standard semiconductor materials that go into energy-harvesting solar cells; the novel materials on the bottom layer perform the cooling task. (Image credit: L.A. Cicero)

Holes in the blanket

Fan’s cooling technology takes advantage of the fact that this thick atmospheric blanket essentially has holes in it that allow a particular wavelength of infrared light to pass directly into space. In previous work, Fan had developed materials that can convert heat radiating off a building into the particular infrared wavelength that can pass directly through the atmosphere. These materials release heat into space and could save energy that would have been needed to air-condition a building’s interior. That same material is what Fan placed under the standard solar layer in his new device.

Zhen Chen, who led the experiments as a postdoctoral scholar in Fan’s lab, said the researchers built a prototype about the diameter of a pie plate and mounted their device on the rooftop of a Stanford building. Then they compared the temperature of the ambient air on the rooftop with the temperatures of the top and bottom layers of the device. The top layer device was hotter than the rooftop air, which made sense because it was absorbing sunlight. But, as the researchers hoped, the bottom layer of the device was significant cooler than the air on the rooftop.

“This shows that heat radiated up from the bottom, through the top layer and into space,” said Chen, who is now a professor at the Southeast University of China.

What they weren’t able to test is whether the device also produced electricity. The upper layer in this experiment lacked the metal foil, normally found in solar cells, that would have blocked the infrared light from escaping. The team is now designing solar cells that work without metal liners to couple with the radiative cooling layer.

“We think we can build a practical device that does both things,” Fan said.

Source: Standford News

Read more

Comments

No comments to display.

Related posts

Toyota Mobility Foundation announces finalists in $4 million global Mobility Unlimited Challenge

The Challenge invited engineers, innovators, and designers from across the world to submit designs for game-changing technologies, incorporating intelligent systems, to improve the mobility and independence of people with lower-limb paralysis. Central to the Challenge is the importance of collaboration with end-users to develop devices which will integrate seamlessly into users’ lives and environments, while being comfortable and easy to use, enabling greater independence and increased participation in daily life.

PRIMA Call for Proposals: Bridging the gap between potential and actual irrigation performance in the Mediterranean

In the Mediterranean basin, water balances and water used for irrigation including irrigation performance is often lower than potential at the farm and at the water users association level. This gap is evident for average performance, but it is particularly important when the dispersion among farmers and their associations is considered. Attaining Sustainable Mediterranean irrigation requires to assess the real water balances in the area of irrigation, amount of water available for irrigation ensuring that water levels are environmentally safe for ecosystems and other needs. Furthermore, optimising irrigation performance requires to combine technological, managerial and governance innovations taking into account the availability, safety and quality of water resources, existing institutional arrangements, as well as crop agronomy planning.
Application Deadline in a month

PRIMA Call for Proposals: Agro-food Value Chain 2019

Proposals should focus on products with high added value, most exposed to fraud and valorise productions that have been discontinued but hold nutritional value and are important for biodiversity conservation. Proposal should also aim at creating trans-national networks of laboratories, validating and harmonizing protocols, sharing open-data on food products of the Mediterranean tradition, providing a robust support for certification and control bodies, and building capacity in key enabling technologies related to authenticity and traceability.
Application Deadline in a month

African Development Bank Group approves $25 million Equity Investment in Fund for Renewable Energy Projects in Africa

ARPF projects will focus on mature technologies including wind, solar PV, small to medium hydro, geothermal and biomass. These would include grid-connected independent power producers (“IPPs”), and decentralized energy projects (commercial & industrial solar, mini-grids and solar home systems companies). The Fund’s strategy is to prioritize projects with a clear timeline to financial close, with emphasis on de-risking early stage greenfield projects.

European call for proposals: Innovative utilisation of aquatic biomass and Novel aquaculture production systems

The proposals should seek to be complementary with or adding to other projects funded under FP7 and Horizon 2020, ERA-NETs, BBI JU or other funding schemes, both ongoing and recently finished. They should reflect awareness of the objectives of running projects in relevant fields to avoid overlap. Proposed projects must demonstrate industry involvement.
Application Deadline in 2 months

European call for proposals: Sustainable and Resilient agriculture for food and non-food systems

Based on the two previous calls, the FACCE SURPLUS partners decided to further advance their successful funding scheme with a third call of the initiative in order to complete the portfolio of projects and filling remaining research and funding gaps. Having in mind the research already conducted in FACCE SURPLUS projects, this call at the end of the initiative aims at further improving collaboration in the area of food and nonfood biomass production and transformation systems.
Application Deadline in 2 months

A Quick Look At The Latest Happenings In The Cloud Integration Market

As an emerging trend of technology the field of cloud Integration is steadily expanding. The global cloud Integration Market is growing approximately at a CAGR of 8% during 2018-2023 and it is expected to grow at a highest CAGR during the forecast period.

A Close Look At The Latest Research Trends Within The 3D Printing Metals Market

3D printing involves the creation of a 3 dimensional object by adding successive layers of a particular material one on top of each other until the overall object has been formed. Metals constitute one of the main materials used for 3D printing.

Call for Applications: Go Green in the City 2019

The Go Green in the City challenge is now entering its 9th year running and our 2019 edition is going to be even bigger, better and bolder! We are looking for students like you from around the world who are willing to put their skills and ideas to the test.
Application Deadline in 4 months